Cellarpro 4200 Wall Mounted System - Free shipping

Designed for wine cellars up to 1000 cubic feet and rated for internal applications, the CellarPro 4200VSi features variable-speed fans with a "high" setting for maximum performance in high-temperature (+115°F) environments and a "low" setting for super-quiet operation. Additional features include a thermostatic heating element and 1/2" I.D. drain line, electronic temperature and adjustable humidity control.

Should be used for interior through-the-wall wine cellar installations, and the condenser can be ducted up to 50 equivalent feet.

Standard features:

  • CellarPro 4200VSi

    Cooling Unit designed for wine cellars from 500 to 1500 cubic feet and rated for internal applications, the 4200VSi features variable-speed fans with a "high" setting for maximum performance in high-temperature (+115°F) environments and a "low" setting for super-quiet operation . Additional features include a thermostatic heating element and 1/2" I.D. drain line, electronic temperature and adjustable humidity control.

     
    • Dimensions 19½"H×14"W×25"D and allow up to 1000 cu. ft. capacity
    • Designed to operate in extreme temperature conditions (+115°F) with high-performance compressor and oversized coated evaporator coils. Includes dual high-output centrifugal fans.
    • Adjustable humidity control via electronic display,
    • Thermostat-controlled condensate evaporator with "On/Off" switch
    • 1/2" ID condensate fitting and drain line
    • Variable speed settings for super-quiet operation for maximum performance - 54 Decibels at low fan speed
    • Ductable condenser intake and exhaust - 50 equivalent feet
    • Advanced electronic thermostat with digital LED display and energy-saver mode & quick-chill mode. Includes audible & visual alarms, Min/Max temperature, maintenance-needed indicator, and power On/Off switch
    • Auto-defrost cycle
    • Stainless steel drain pan and removable steel case
    • Replaceable condenser air filter
    • Rechargeable refrigerant Schraeder valve
    • Adjustable mounting brackets
    • Vibration-free operation
    • Dual power source - front or rear
    • Compatible with a dedicated 15-amp circuit
    • ETL tested and certified (UL Standards)

    Optional features:

    • CellarPro 4200VSx Wine Cooling Unit (Exterior)

      designed for wine cellars from 500 to 1500 cubic feet and rated for external applications, the 4200VSx features variable-speed fans with a "high" setting for maximum performance in high-temperature environments and a "low" setting for super-quiet operation. Additional features include an exterior hood, coated condenser coils, double-powdercoated case and exterior-grade power cord, as well as a thermostatic heating element and 1/2" I.D. drain line, electronic temperature and adjustable humidity control.

       
      • Auto-Dialer as an added level of protection for expensive wine collections. Recommended for wine collectors who travel frequently and/or for wine cellars that are located in warm. The auto-dialer will warn you remotely, calling up to 4 phone numbers that you program in advance, if the cooling unit has triggered an alarm and/or has lost powered. Additional features include programmable pauses and tone/pulse dialing. The auto-dialer is directly wired to the cooling unit with the wiring exiting from the rear of the cooling unit. The auto-dialer also has 9-volt standby battery backup in case of power outage.
      • Cord Out Side - the 8-foot, 16-gauge grounded power cord can be routed to exit from the left side of the cooling unit, just below the power outlet. This modification is designed for cooling unit installations where the power outlet is located inside the cellar.
      • A condensate fitting is recommended when the cooling unit will be installed in a wine cellar. The fitting allows excess condensation to drain from the rear of the cooling unit through the vinyl tube. The included tubing measures 8' long with a 1/2" I.D.
      • Pair of mounting clips and fluorescent light.
      • A white louvered grill can be installed ouside the cellar, painted and used to cover the rear of the wine cooling unit. Measures 20" x 12".
      • Optional bottle probe.

      * Cubic footage is calculate by measuring the cabinet dimensions and multiplying H' x W' X D'.


      ***Free shipping
Base Price: $3,195.00
Quantity:
Total:  

Reviews

Your opinion is important to us...tell us what you think!

Review This Product