CellarPro 8000S Split Refrigeration System - Free shipping

Designed for wine cellars up to 2000 cubic feet and rated for internal or external (see notes below) applications, CellarPro's 8000S refrigeration system allows the noise from the condensing unit to be removed from living areas, and eliminates the need for large holes in your cellar wall. This is achieved by separating the evaporator unit from the condensing unit.

Only a few small openings for the line-set and drain line are required to connect the evaporator and condensing units. Inside the cellar, the evaporator unit is designed to mount on the wall near the top of the wine cellar. Outside the cellar, the condensing unit is attached to the evaporator unit by a line-set (sold separately) up to 100 equivalent feet.

Our advanced evaporator unit uses a variable-speed centrifugal fan with three settings, including a "high" setting for maximum performance and a "low" setting for super-quiet operation. Our high-performance condensing unit is designed to handle environments ranging from 0°F to 110°F.

Important Notes: External installations require our external hood (sold separately). For exposure to environments below 40°F, our compressor heater modification is required. Access to the left side of the evaporator unit is required for installation. All split systems must be installed and charged on site by a qualified HVAC professional. Line-set equivalent feet must be calculated in accordance with ASHRAE guidelines; refer to our Line Sizing Chart for more information.

Capacity: Wine Cellars up to 1500 cubic feet with proper insulation and a moisture barrier.

Shipping: Free

Features:
* Up to 2000 Cu. Ft. Capacity
* Engineered to operate in interior and external environments (0°F to 110°F)
* For temperatures below 40°F, our compressor heater modification is requred
* Schraeder Valve for Refrigerant Charge (R134A) and Superheat Adjustment
* Multiple Knock-Outs and Access Points
* Expansion Valve and Liquid Line Solenoid Valve come Factory Installed
* Separate Power Supplies for Evaporator and Condenser Units
* Evaporator is Factory Pressurized and Shipped with Dry Nitrogen
* High-Performance Condensing Unit
* Variable Speed Evaporator Fan for Super-Quiet Operation or Max Performance
* Oversized Coated Evaporator Coils
* Adjustable Humidity Control via Digital Display
* 1/2" ID Drain Line
* 54 Decibels at Low Fan Speed (Evaporator)
* Electronic Thermostat, Digital LED Display and Audible/Visual Alarms
* Auto-Defrost Cycle
* Sight Glass and Liquid Line Filter/Drier
* Oversized Receiver for Long Line Sets
* Adjustable Low Ambient Fan Cycling Control
* Auto Reset High Pressure Switch
* Compatible with a Dedicated 20-Amp Circuit
* Optional Bottle Probe
* Optional Outdoor Cover
* ETL Tested and Certified (UL Standards) (PENDING)

Specifications:
* Capacity:Up to 2000 Cu Ft
* Universal Racking:noinfofound
* Size:46.4w x 14.4d x 13.2h (in)
* Weight:134 lb
* Shipping Dims:noinfofound
* Shipping Weight:127 lb
* Power/Rating:115V AC / 60 Hz

Condensing Unit Dimensions:
- 76 lbs
- 16.8w x 20.8d x 14h

Evaporator Unit Dimensions:
- 85 lbs
- 46.4w x 14.4d x 13.2h

Compressor Amps:
- Startup: 51.0 Amps
- Unit Amp Rating: 18.2 Amps (high fan speed)
- Total Watts: 1272 (med fan speed)
BTUH @ 55°F / Evaporator Decibels
- Low Fan Speed: 5961 / 54 dbA
- Med Fan Speed: 6346 / 58 dbA
- High Fan Speed: 6713 / 66 dbA
* Warranty:2 Years (Entire System) / 5 Years (Compressor)
Base Price: $4,595.00
Quantity:
Total:  

Reviews

Your opinion is important to us...tell us what you think!

Review This Product